Lead paint in older Brisbane homes is a real health risk, especially for children. AZURE Paint handles the full job, from safe removal through to a freshly painted, fully repaired surface. One contractor. One engagement.

If your home was built before 1970, there's a strong chance lead paint is hiding under your current finish. It only becomes dangerous when it deteriorates or gets disturbed. That's exactly what happens when you sand, scrape, or strip it without the right gear.
Australia restricted lead in domestic paint from 1970. Many pre-1970 homes still carry layers underneath their current coat. Older homes can contain lead at levels up to 50%.
Children under four absorb up to 60% of any lead they swallow. Adults absorb around 10%. Even small exposures during pregnancy can affect a baby's nervous system.
Dry sanding, scraping, or burning lead paint creates fine airborne dust. That dust settles into carpet, soft furnishings, and roof cavities. Once it's in the home, it's hard to get out.
WorkSafe QLD treats lead paint removal as a regulated "lead process" under the Work Health and Safety Regulation 2011. Licensed operators must follow specific containment and disposal rules.
You can't always tell by looking. Most pre-1970 homes have been repainted since, so the lead layers sit hidden under newer paint. The safe move is to assume it's there in any older home and have a licensed painter handle it from the start.
Alligator-pattern cracking. A chalky residue that comes off when you rub the paint. Multiple thick, brittle layers showing through chips. These are the visible warning signs on older weatherboard, fascia, and window frames. Even when the surface looks fine, the lead can sit underneath, hidden by newer coats.
If you're seeing any of this on a pre-1970 home, get it assessed before you sand, scrape, or pressure wash anything.

Most operators in Brisbane will strip the paint and stop there. You're left with a hazardous, half-finished surface to deal with. AZURE takes the job from start to finish, in a single engagement.
We inspect every surface in scope, identify the affected substrates, and check for soft surroundings (carpet, gardens, neighbours' fence lines) that need protecting. You get a clear written quote based on what we find.
We seal off the entire work zone with two layers of fabric sheeting. Once the job is finished, that sheeting goes out as lead-contaminated waste. Most operators skip this step because it's an expense they don't want to absorb. We don't skip it.
Disposed as contaminated wasteWe apply the Peel Away 1 paste system to the surface, then seal it with the laminated paper. The system lifts up to 30 layers in one application, including the lead. Because the paint stays wet under the paper, no airborne dust is created.
Once the paste is removed, we scrape and sand the bare substrate to a clean, sound finish. The surface is neutralised and ready for repair work.
Older substrates often need patching once the paint is off. We fill holes, hairline cracks, and damaged sections with the right filler so the new paint sits flat and lasts.
We apply a quality undercoat suited to the substrate. This locks in the prepared surface and gives the topcoat something to bond to properly.
Two top coats in your chosen colour and finish. You don't end up with a stripped surface and a separate quote for the repaint. You end up with a freshly painted home.
Lead paint isn't a side service for us. It's a job we take seriously and price properly, because it's a job that has to be done right.
One quote, one team, one finish. We handle removal, prep, repair, undercoat, and topcoat. No second contractor needed.
We use the Peel Away 1 system for stripping. It traps lead in a wet paste, lifts up to 30 layers, and creates no airborne dust or toxic fumes.
Dual fabric masking. Sealed waste. Tipped at the right facility. We follow the rules so your home, your family, and the next-door neighbours stay safe.
We're based in Wishart with 18+ years on the tools and a 5.0 Google rating. You're hiring a local team that's accountable, not a sub-contracted crew.
AZURE Paint holds a 5.0 star rating across 19 Google reviews. The standards behind those reviews carry into every lead paint job we take on, careful prep, clean handover, and a finish that lasts.
★★★★★ 5.0 on Google
Quick answers to the questions Brisbane homeowners and property managers ask us most.
If your home was built before 1970, assume lead is present somewhere until proven otherwise. Visual signs include alligator-pattern cracking, a chalky residue when paint rubs off, or many old layers showing through chips. You can't always tell by sight, especially when newer coats sit on top. A test kit from a hardware store is a quick first step. We can also test on site as part of the assessment.
For most jobs, yes. The Peel Away system traps lead in a wet paste, so there's no airborne dust during the strip. We seal the work zone with dual fabric masking to keep contamination contained. We'll talk you through the specifics of your job during the quote, including whether children, pregnant occupants, or pets should be away from certain areas while we work.
It depends on the size of the area, the number of paint layers, the substrate condition, and access. Across Australia, full-home lead paint jobs typically range from $4,500 to $15,000 or more. Because we include the full repaint, our quote is for a finished property, not just a stripped one. Every quote is fixed and itemised so you know exactly what you're paying for.
Smaller scope jobs (a feature wall, a single room, a window set) can run a few days. Whole-house exteriors usually run one to three weeks depending on size, layers, and weather. We'll give you a realistic timeline as part of the quote and keep you posted as we work.
Stripped paint, used paper, and the dual fabric masking all leave the site as lead-contaminated waste. We seal it on site and dispose of it through the right channels. It doesn't end up in your wheelie bin and it doesn't end up in the garden.
Sometimes. If the existing lead paint is in sound condition (not flaking, chipping, or chalking), encapsulation with the right primer and topcoat is an option. If the surface is deteriorating or you're planning renovations that disturb it, removal is the safer call. We'll tell you straight which option suits your property.
Yes. WorkSafe QLD treats lead paint removal as a regulated "lead process" under the Work Health and Safety Regulation 2011. There are specific requirements around containment, worker health monitoring, and waste disposal. We work within those requirements as a QBCC-licensed contractor.
AZURE Paint is based in Wishart and works right across Brisbane. Lead paint sits in older homes across the eastern, southern, and inner suburbs, so our service area covers the lot. If you don't see your suburb below, ask. We travel.
Primary, secondary, and surrounding areas across Brisbane.
Tell us about your home and what you've noticed. We'll come out, assess the job properly, and give you a fixed-price quote for the full removal and repaint, in writing.
📋
Send Your Details
Fill out a quick form and we'll call you the same day* to lock in your free quote.
📅 *Monday to Friday
🗓️
Book Online 24/7
Pick a date and time that suits you. Book your free quote anytime, day or night.
⚡ Instant confirmation
⭐5.0 Stars on Google
🛡️QBCC Licensed
🏗️Painting Since 2008

Email: [email protected]
Phone: 0424 446 668
Address: 271 Wishart Road, Wishart Queensland 4122
QBCC License No: 15557721
Quick Links
Powered by Action Digital
COPYRIGHT © 2025 AZURE Paint. ALL RIGHTS RESERVED.