Fence Painting in Wishart, Brisbane

Water-based (acrylic) exterior paints are what we use on most timber fences these days. They flex with Brisbane's heat and humidity better than oil-based paints and resist cracking and chalking for longer. Oil-based enamel still earns its place on high-touch spots like gates, where a harder finish holds up to knocks. We'll recommend the right one for your fence rather than a one-size answer.

Paint gives a solid, opaque colour and the most UV protection, which usually holds up best on an exposed Brisbane fence line. Stain lets the timber grain show through for a more natural look, but needs topping up more often, especially on faces that get full sun. If you want low-maintenance and long-lasting, paint wins. If you want the timber look, we'll talk you through a stain suited to your fence's exposure.

Colorbond needs a specialist approach, not a standard exterior paint. We degrease and key the factory finish, spot-prime any rust or bare metal, then apply a coating formulated to sit over Colorbond without lifting or bubbling. Painting it like a normal wall is the most common mistake we see, and it fails within a season.

Yes. Powder-coated steel is a hard, glossy factory finish, so we clean it thoroughly and lightly sand it to give new paint something to grip, then prime any bare or rusted spots before the topcoat. Skipping that step is why DIY paint jobs on powder-coated steel usually peel within a year.

In Queensland, dividing fences are generally treated as a shared responsibility, so it's good practice to let your neighbour know before repainting, even if you're covering the full cost yourself. We're happy to only paint your side if that's what you and your neighbour agree, though a fence usually looks and lasts better repainted as one job on both faces.

Modern exterior acrylics are usually rain-resistant within 2 to 4 hours in good drying conditions, though we always aim to give a fence a full dry day either side of the job. We check the forecast before we schedule, and if rain's moving in early, we'll hold off rather than risk a rushed coat.

Most fences in Brisbane need repainting every 3 to 5 years, though it depends on material and exposure. West and north-facing timber palings often need attention sooner because of the UV, while shaded or protected sections can go longer. Our free quote includes an honest read on where your fence actually sits.

DIY fence painting can look cost-effective on paper, but professional results come from proper equipment, premium materials and knowing which prep step actually matters for your fence type. Factor in the cost of quality materials, your own time, and the risk of redoing a rushed job, and professional painting often works out more economical. Get in touch for a free quote.